); gtag('config', 'UA-75758496-1');

Steel or Aluminum Flat Expanded Metal Mesh from wisepowder's blog

Steel or Aluminum Flat Expanded Metal Mesh

Expanded metal mesh is uniformly slit and stretched, forming diamond-shaped openings in the sheet that allow for the passage of light, air, heat, and sound. The strands and bonds of the diamonds in the expanded metal sheet add strength and rigidity. Since no metal is lost in the expanding process, expanded metal is a cost-effective alternative to perforated metal.To get more news about Expanded metal sheet, you can visit mesh-fabrics official website.
Main Export Markets:
AsiaAustralasiaCentral/South AmericaEastern EuropeMid East/AfricaNorth AmericaWestern Europe
To protect themselves, buyers should take the following steps. First, order the material produced to EMMA 557-15 or ASTM F-1267-15 standards. Next, weigh the sheet. Standard weights are published per 100 square feet. On a buy of ½ #13 flat carbon steel, a 4-by-8 sheet should weigh 40.32 pounds, plus or minus 10 percent. If the sheet delivered weighs less than 36.29 pounds, the product is substandard. On grating products, which are typically load bearing, the allowed variation is limited to plus or minus 5 percent.

Specialty or made-to-order products are often produced to an engineering drawing rather than any specification. These are generally designed for a specific purpose and might be produced to meet some other, more important criteria, such as fitting into a jig. Manufacturers of shopping carts, lockers or furniture often have their own internal requirements for expanded metal. They may legitimately differ from the normal, pattern-sized sheets generally stocked and sold by metal service centers.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment
No Content
Google this